Festool Domino, DF 500 Q & CT 36 E AC Dust Extractor Package
DF 500 Q Domino Joiner 500 Q
DF 500 Q Domino Joiner 500 Q
The evolution of joinery.
Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.
With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the Domino joiner enables precise mortise placement and spacing.
Carbide Tip Spiral Bit:
Durable, long-lasting bit withstands 5,000-14,000 joints depending on material.
Fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
Stepped Height Stop:
7 different step positions for different material thicknesses for fast and easy fence height adjustment.
Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application.
Your mortises are clean and ready for glue when the Domino is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life.
Mortise Width Adjustment:
Adjusting the width of the mortise allows for easier alignment when joining panels.
Rapid Bit Change:
Means you can change a bit in under 30 seconds to match desired tenon size.
Patented Routing Principle:
The spiral cutter rotates and oscillates to create perfect mortises.
Cutter spindle speed - 24,300 rpm
DOMINO slot cutter diameter - (5/6/8/10 mm)
Miter routing - 0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
Movable stepped stop - (16/20/22/25/28/36/40 mm)
Power consumption - 420 watts
Routing depth stop - (12/15/20/25/28 mm)
Routing height adjuster with scale (5-30 mm)
Weight 7 lbs. (3.2 kg)
DOMINO cutter D 5 (5mm)
Plug-it power cord
Systainer SYS 2 T-Loc
Festool CT 36 E AC Dust Extractor
When using the Festool Planex Sander, a large amount of dust is created. Efficiently capture that dust with the Festool CT 36 E AC dust extractor.
The Festool CT 36 E AC dust extractor can also be used with any other Festool tool that creates waste. However, if you want to use this machine with all Festool tools, you will need to purchase a 27mm hose. (452878)
What makes the CT 36 E AC so desireable? Normal dust extractors don't have the ability to deal with large amounts of dust. The CT 36 E AC uses quick bursts of air, to automatically clean the filter for continued, uninterrupted use. This allows the user to keep their focus where it counts, and save money in the process.
The CT 36 E AC comes equipped with a special, large antistatic 36mm hose that won’t kink or collect dust..
- Container/Filter Bag Capacity: 9.5gal./8.9gal.
- Dimensions: 24.8"D x 14.4"W x 23.4"H (630 x 365 x 596mm)
- Weight: 29.8lbs. (13 kg)
- Noise Level: 71dB(A)
- Power Consumption:350-1,200 watts/2.9-10 amps, 120v AC
- Maximum Suction Capacity: 137 CFM (3,900 l/min)
- Max. Vacuum: 96" Static water lift (24,000 Pa)
- Tool triggered or manual on-off switch with smooth start up and shut off delay
- Replaceable Filter Bag
- Integrated cleaning device cleans the filter quickly
- Stepless electronic suction control
- Wet and dry extraction without complicated changeover
- Integrated storage
- Blower port
- Antistatic equipment protects from electrostatic charging
- Flat area for tools or systainer stacking
- Locking rear brakes
- CT 36 E AC Dust Extractor
- Fitted Filter Bag
- 36mm Hose
CT 36 E AC requires optional 27mm hose to connect to any Festool tool other than Planex sander.
You may also be interested in the following product(s)