SKU
FTK576688

576688, Festool TS 55 Plus with Rail and 28-Tooth Combination Blade, Emerald Set

$690.00
SKU
FTK576688

Festool's flagship tracksaw provides precision, portability and high performance. Now available for a limited time with an additional high-quality 28-tooth general purpose blade.

576688, Festool TS 55 Plus with Rail and 28-Tooth Combination Blade, Emerald Set

Festool's flagship tracksaw provides precision, portability and high performance. Now available for a limited time with an additional high-quality 28-tooth general purpose blade (496304, a $61.00 value!)

575387, Festool TS 55 REQ-F-Plus Imp Plunge Cut Circular Saw (NO RAIL)

The TS 55 REQ is the most portable and versatile of Festool's plunge cut saws.

It's unbelievably easy to use just the saw. You can incorporate a guide rail with the saw, or you can mount it on a multifunction table. The choice of using a guiderail gives you control for perfectly straight, splinter-free cuts. Having zero-tearout, glue-ready cuts the first time around won't cost you an investment in time and material. For a quick and easy setup, the TS 55 cuts right on the edge of the scribe line, even on angle or bevel cuts. Your saving time with the scribe line being the actual cut line. Creating matched panels by cutting stacked sheets goods with one cut is also time-saving. As you are making a cut, the built-in riving knife descends along with the blade. The spring-loaded knife does not intefer when making plunge cuts. This puts you in control of the tool, reducing the chance of kickback along with the wear-and-tear of the blade and motor. The dust extraction port ensures less dust and a clear view of the workpiece, resulting in less time with cleanup. Festool guarantees a high-quality power tool and years of reliable service with its three-year warranty.

Features:

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
  • The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
  • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.

 

Specifications:

  • Arbor size .787" (20 mm)
  • Bevel cuts 0º - 45º
  • Cutting depth on guide rail 1 15/16" (50 mm) straight down and 1 7/16" (37 mm) at 45°
  • Cutting depth without guide rail 2 1/8" (55 mm) straight down
  • Power consumption 1200 watts / 10 amps 120 v AC
  • Saw blade diameter  6-1/4" (160 mm)
  • Saw blade speed 2,000 - 5,200 rpm
  • Weight 9.92 lbs. (4.5 kg)


Includes:

  • TS55 Plunge Cut Circular Saw
  • Limit stop FS/2
  • Splinterguard
  • 48-tooth carbide saw blade (495377)
  • Plug-It power cord
  • Emerald Systainer

496304, Festool Universal 28-Tooth Saw Blade TS 55

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut in all types of wood. This thin-kerfed blade design meets less resistance, for more efficient cutting, and produces less material waste. Laser cut expansion slots reduce vibration for faster, quieter cutting. An oversized 20mm arbor enables more secure fastening of the blade to the saw, further reducing vibration for more precise cutting. 

  • 28 tooth; 2.2mm kerf; 20mm arbor; 15 deg hook angle; ATB
  • Clean cutting general purpose blade for wood and soft plastics; fine rip cut blade for glue-ready joints
  • Oversized 20mm arbor enables more secure fastening of the blade to the saw, reducing vibration for more precise cutting
  • Thin kerfed blades meet less resistance, for more efficient cutting, and produce less material waste
  • Laser cut expansion slots reduce vibration for faster, quieter cutting

491498, Festool FS 1400/2, 55 inch guide rail

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

Festool absolutely straight, safe and precise. Festool FS guide rails are available in ten different lengths from 32 to 197 inches, providing the right rail for every application. Simply lay the guide rail on the workpiece and line up the splinterguard flush with the scribe line. Now place your Festool circular saw on the guide rail. The guide rib on the rail engages in the guide slot on the tool. You save laborious measurements and obtain perfectly straight and accurate cuts.
Festool guide rails are equipped with a splinter guard. A rubber lip pressing onto the workpiece along the scribe line ensures splinter-free cut edges. Precise angle cuts up to 45 on both sides. With the FSW angle unit and a guide rail you can quickly set angles of 0 to 45 to either side. This allows you to cut boards and panels to any size at any desired angle, fast, safely, and accurately. A guide rail fixed into place with the special Festool FSZ clamps, and a guide stop adjusted to be free of backlash, provide the basis for ultra-precise work. For example, use it for dovetail joints produced in several steps. Even when routing against the grain, the router cannot deviate from the desired path, giving perfect results.


Guide rail features:

  • Hard-anodized surface
  • Soft, non-slip coating
  • Hard rubber splinter guard


Mounting slot for:

  • FSW angle unit
  • FSV connectors
  • FSZ clamps
  • FS-AW Deflector


Length 55 inches (1400 mm)

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

At Beaver Industrial Supply, we are committed to offering the best selection of machinery, tools, and supplies at the best price; this is why we price match! If a local or select online competitor* is offering an exact, in-stock item for less, let us know and we’ll match their price! Please refer to our policy terms and conditions listed below.

 

Customer must contact us (in-store, phone, or email) to inform one of our customer service representatives of the particular item, its lower price, and the retailer selling the item, before they place their order.

 

If customer doesn’t see the competitor’s lower price until after they purchased the exact, in-stock item from us, then that customer has 30 days to notify us so that we can issue a refund for the amount of the price difference.

 

BIS reserves the right to verify the price and the availability of the item (i.e. size, model, quantity, brand, color) to ensure that it matches our item and that the competitor selling the item has it currently in-stock during the time the price match is requested.

 

 

BIS will price match:

>  Products from the following brands: Fein, Mirka, Kreg, Sawtrax, Triton, Amana Tool, Imperial Blades, Laguna, Knipex, and Razorweld.
> Items from local or online Authorized Dealers of: Fein, Mirka, Kreg, Sawtrax, Triton, Amana Tool, Imperial Blades, Laguna, Knipex, and Razorweld.*

 

 

BIS will NOT price match:

> Items from online marketplaces, auction sites, or sites that require membership such as but not limited to: Amazon, eBay, Craigslist, Overstock.com, Newegg, Bonanza, Sears.com, Rakuten, and Yahoo! Shopping.*
Any Festool, JET, Wilton or Powermatic items.
Misprinted ad prices of other retailers or “going out of business"/closeout sales.
Ads for free gift or gift card with purchase. Percentage Off or Buy One Get One Free advertisements without a specific price.
Instant Rebates, Bundle Offers, Free Shipping Offers, Mail-in Offers, or Offers that include financing.

 

This policy applies to all items sold at Beaver Industrial Supply or one of its subsidiary companies. Beaver Industrial Supply reserves the right to modify the terms of this Policy at any time. For questions regarding our Price Match Promise Policy, please contact our Customer Service Department by phone 1(800)365-6677 or email tooltalk@beavertools.com.

Frequently Bought Together